What is Ntoskrnl.exe Error?

What are the causes of Ntoskrnl.exe Error?

How to fix Ntoskrnl.exe Error?

There are some very critical files comes with the operating system which are mandatory to be used when you need to start the windows operating system. These files actually contains some basic codes that is must to boot the OS. The file is used in the boot cycle of the windows operating system. If by any means, the Ntoskrnl.exe file is corrupted, damaged or deleted, you will not be able to boot your computer. This is preferably known as Ntoskrnl.exe Error. It appears like this:

Error no. 1

“Windows could not start because of a computer disk hardware configuration problem

Could not read from the selected boot disk. Check boot path and disk hardware.

Please check the Windows documentation about hardware disk configuration and your hardware reference manuals for additional information.”

Error no. 2

“Windows NT could not start because the following file is missing or corrupt:

Winnt_rootSystem32Ntoskrnl.exe

Please re-install a copy of the above file.”

Error No. 3

“Winnt_rootSystem32Hal.dll missing or corrupt:

Please re-install a copy of the above file.”

The most common causes of Ntoskrnl.exe Error are:

1. The file ntoskrnl.exe is damaged or missing from your pc
2. The default value present in the Boot Loader Section of your Boot.ini file is corrupt or missing
3. The Windows XP is installed in some other location than the mentioned in the Boot.ini file
4. The partition path in the boot.ini is incorrectly set
5. Hardware Component failures

Resolution : How to fix Ntoskrnl.exe Error

If the error message is appearing due to damaged ntoskrnl.exe file then the following steps will fix Ntoskrnl.exe Error:

1. Insert Windows XP Installation CD in your CD-ROM drive

2. Reboot your system and press F2 to boot from CD

3. Once setup files have been loaded, Press R to open recovery console

4. In Recovery Console, select Windows XP installation you need to log on to (press 1 if there is a single OS installed on the system) and hit Enter

5. Next type administrator password and press enter

6. On the Recovery Console Command Prompt, type the command and then press Enter to run it:

   1. For single Processor (Single CPU) systems

   • expand <cd_drive>:i386ntoskrnl.ex_<hd_drive>:Windowssystem32ntoskrnl.exe
   2. For Multi Processor (multi CPU) systems
   • expand <cd_drive>:i386ntoskrnl.ex_<hd_drive>:Windowssystem32ntoskrnl.exe

If asked for the confirmation, press Y to overwrite the file.

If the Ntoskrnl.exe is appearing in the list of Currently running Processes then you should understand that it is actually a virus that has changed its name and is now running on the system. You should open Task Manager and go to processes tab to find out whether it is present or not. Generally the Ntoskrnl.exe usually not made to seen in the Windows Task Manager but if it is visible there, means there is a problem in the windows OS.

In this situation to remove Ntoskrnl.exe virus on your PC, you need to use an antivirus application and clean your computer by scanning it properly and remove all the found rogue infections. You need to perform a deep scan on your system to find deepest rogues.

Once it is done, you need to clean windows registry and this can be safely done using windows Registry cleaner application. This application can easily perform the deep scan of windows registry and make your registry clean and 100% working.

If you are not easy with all these steps the there is an automatic way to fix Ntoskrnl.exe Error. You need Ntoskrnl.exe Error Fix Tool. This is a complete application to scan and fix Ntoskrnl.exe Error by performing all the actions that are necessary as well as recommended. It will protect your PC from further damages and will make it running smoother. It supports all different windows versions and is available to be download so go for it and download Ntoskrnl.exe Error Fix Tool.

Related Posts: